Nashville Tuning tuningE A D G B E
Nashville tuning uses the high octave strings from a 12-string set on the bottom four strings, giving a bright, shimmering sound that sits above a normal guitar in a mix.
Also called · High-strung
String chart
Tuning your guitar to Nashville Tuning
- 1
Allow microphone access when your browser asks. The audio is analysed on your device and never uploaded.
- 2
Pluck one string at a time and let it ring. The tuner detects which string you're playing.
- 3
If the needle is left of centre the string is flat, so tighten it. If it's right of centre the string is sharp, so loosen it.
- 4
Turn the peg slowly until the note turns green and the needle sits in the middle. Then move on to the next string.
- 5
Go round once more: tuning one string slightly changes the tension on the others.
Guitar tunings
Standard
Drop
Lowered
Open
Alternate
Questions & troubleshooting
- What are the notes of Nashville Tuning tuning?
- Nashville Tuning tuning on guitar is E A D G B E, from the lowest string to the highest.
- How do I tune to Nashville Tuning from standard tuning?
- Starting from standard (E A D G B E): string 6 up 12 semitones, string 5 up 12 semitones, string 4 up 12 semitones, string 3 up 12 semitones. Every other string stays the same. Use the tuner above to check each string.
- Is Nashville Tuning tuning bad for my guitar?
- No. Changing tuning is completely safe. Just tune gradually, and when raising pitch go slowly so you don't over-tighten a string. After a big change, the neck can take a day to settle, so check your tuning again.