Fig. 1 · · Double C
The Online Tuner
♭ Flat
In tune
Sharp ♯
READY
A4 440 HZ
Strings · tap to hear
Start
A4 440

Press start and allow the microphone · nothing is recorded · or tap a string to tune by ear

Fig. 2 · Headstock · tap a note to hear it

Double C tuningG C G C D

Double C (g C G C D) is a favourite clawhammer tuning for old-time tunes in C and D.

Also called · gCGCD

§ 1

String chart

String 1 is the thinnest. Frequencies are exact at A4 = 440 Hz; change the reference on the A4 knob.
StrNoteFrequency
1DD4 · Re293.7 Hz
2CC4 · Do261.6 Hz
3GG3 · Sol196.0 Hz
4CC3 · Do130.8 Hz
5GG4 · Sol392.0 Hz
§ 2

Tuning your banjo to Double C

Automatically with the microphone, or by ear: tap any note on the headstock to hear a real recorded reference.
  1. 1

    Allow microphone access.

  2. 2

    Pluck each string and let it ring. Start with the 4th string (low D) and work to the 1st.

  3. 3

    Tune the short 5th string last, and check it against the 1st string fretted at the 5th fret.

§ 3

Banjo tunings

4 tunings, all free. Notes listed from the 5th string.
§ 4

Questions & troubleshooting

What are the notes of Double C tuning?
Double C tuning on banjo is G C G C D, from the 5th string to the highest.
How do I tune to Double C from standard tuning?
Starting from standard (G D G B D): string 4 down a whole step, string 2 up a half step. Every other string stays the same. Use the tuner above to check each string.
Is Double C tuning bad for my banjo?
No. Changing tuning is completely safe. Just tune gradually, and when raising pitch go slowly so you don't over-tighten a string. After a big change, the neck can take a day to settle, so check your tuning again.
§ 5

The T-1 range

One tuner, set up for every instrument.