Low G tuningG C E A
Low G tuning uses the same notes as standard but drops the G string an octave, giving a fuller, deeper sound and a continuous low-to-high range. It needs a low-G string.
Also called · Linear tuning
String chart
Tuning your ukulele to Low G
- 1
Allow microphone access and hold the ukulele near your device.
- 2
Pluck the G string (the one closest to your chin) and let it ring.
- 3
Tighten if the needle is to the left (flat), loosen if it's to the right (sharp), until it turns green.
- 4
Repeat for C, E and A. New nylon strings stretch a lot, so expect to retune often for the first few days.
Ukulele tunings
Standard
Alternate
Extended range
Questions & troubleshooting
- What are the notes of Low G tuning?
- Low G tuning on ukulele is G C E A, from the lowest string to the highest.
- How do I tune to Low G from standard tuning?
- Starting from standard (G C E A): string 4 down 12 semitones. Every other string stays the same. Use the tuner above to check each string.
- Do I need different strings for Low G?
- Not necessarily, but when strings are tuned down a long way they lose tension and can buzz or feel floppy. A slightly heavier string gauge keeps them stable and in tune.
- Is Low G tuning bad for my ukulele?
- No. Changing tuning is completely safe. Just tune gradually, and when raising pitch go slowly so you don't over-tighten a string. After a big change, the neck can take a day to settle, so check your tuning again.