Fig. 1 · · Solo Tuning
The Online Tuner
♭ Flat
In tune
Sharp ♯
READY
A4 440 HZ
Strings · tap to hear
Start
A4 440

Press start and allow the microphone · nothing is recorded · or tap a string to tune by ear

Fig. 2 · Headstock · tap a note to hear it

Solo Tuning tuningF♯ B E A

Solo tuning raises every string a whole step (F♯ B E A) for a brighter, more projecting tone. It's usually used with lighter solo strings.

Also called · F#BEA

§ 1

String chart

String 1 is the thinnest. Frequencies are exact at A4 = 440 Hz; change the reference on the A4 knob.
StrNoteFrequency
1AA2 · La110.0 Hz
2EE2 · Mi82.41 Hz
3BB1 · Si61.74 Hz
4F♯F♯1 · Fa♯46.25 Hz
§ 2

Tuning your double bass to Solo Tuning

Automatically with the microphone, or by ear: tap any note on the headstock to hear a real recorded reference.
  1. 1

    Allow microphone access and keep your device close to the instrument.

  2. 2

    Pluck or bow a long, steady note. Low notes take a moment to read.

  3. 3

    Harmonics (half-way up the string) sound an octave higher and are often easier for microphones to pick up.

§ 3

Double Bass tunings

2 tunings, all free. Notes listed from the lowest string.
§ 4

Questions & troubleshooting

What are the notes of Solo Tuning tuning?
Solo Tuning tuning on double bass is F♯ B E A, from the lowest string to the highest.
How do I tune to Solo Tuning from standard tuning?
Starting from standard (E A D G): string 4 up a whole step, string 3 up a whole step, string 2 up a whole step, string 1 up a whole step. Every other string stays the same. Use the tuner above to check each string.
Is Solo Tuning tuning bad for my double bass?
No. Changing tuning is completely safe. Just tune gradually, and when raising pitch go slowly so you don't over-tighten a string. After a big change, the neck can take a day to settle, so check your tuning again.
§ 5

The T-1 range

One tuner, set up for every instrument.